A bioetching-induced visualized-organic photoelectrochemical transistor dual-signal mode sensor for alkaline phosphatase detection.

A study of an integrated OPECT biosensor gate and the EC color-changing region on the same chip was carried out, achieving sensitive detection through bioetching-induced signal changes. Enzymatic bioetching enables specific alkaline phosphatase (ALP) detection by catalyzing the production of CdS, which modulates the channel current and generates a visual signal.

Optimization of Electrochemical Sensitivity in Anticancer Drug Quantification through ZnS@CNS Nanosheets: Synthesis via Accelerated Sonochemical Methodology.

Zinc sulfide/graphitic Carbon Nitride binary nanosheets were synthesized by using a novel sonochemical pathway with high electrocatalytic ability. The as- obtained samples were characterized by various analytical methods such as Transmission Electron Microscopy (TEM), Field emission scanning electron microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy (XPS) to evaluate the properties of ZnS@CNS synthesized by this new route. Subsequently, the electrical and electrochemical performance of the proposed electrodes were characterized by using EIS and CV to establish an electroactive ability of the nanocomposites. The complete properties like structural and physical of ZnS@CNS were analyzed. As-prepared binary nanocomposite was applied towards the detection of anticancer drug (flutamide) by various electrochemical methods such as cyclic voltammetry (CV), differential pulse voltammetry (DPV) and amperometry. The glassy carbon electrode modified with a ZnS@CNS composite demonstrates a remarkable electrocatalytic efficiency for detecting flutamide in a pH 7.0 (PBS). The composite modified electrode shows synergistic effect of ZnS and CNS catalyst. The electrochemical sensing performance of the linear range was improved significantly due to high electroactive sites and rapid electron transport pathways. Crucially, the electrochemical method was successfully demonstrated in biological fluids which reveals its potential real-time applicability in the analysis of drug.

Novel insights into the kinetics and mechanism of arsenopyrite bio-dissolution enhanced by pyrite.

Arsenopyrite and pyrite often coexist in metal deposits and tailings, thus simultaneous bioleaching of both sulfides has economic (as well as environmental) significance. Important targets in bio-oxidation operations are high solubilization rates and minimized accumulation of Fe(III)/As-bearing secondary products. This study investigated the role of pyrite bioleaching in the enhancement of arsenopyrite dissolution. At a pyrite to arsenopyrite mass ratio of 1:1, 93.6% of As and 93.0% of Fe were solubilized. The results show that pyrite bio-oxidation can promote arsenopyrite dissolution, enhance S0 bio-oxidation, and inhibit the formation of jarosites, tooeleite, and amorphous ferric arsenate. The dry weight of the pyrite & arsenopyrite residue was reduced by 95.1% after bioleaching, compared to the initial load, while only 5% weight loss was observed when pyrite was absent. A biofilm was formed on the arsenopyrite surface in the presence of pyrite, while a dense passivation layer was observed in the absence of pyrite. As(III) (as As2O3) was a dominant As species in the pyrite & arsenopyrite residue. Novel and detailed findings are presented on arsenopyrite bio-dissolution in the presence of pyrite, and the presented approach could contribute to the development of novel cost-effective extractive bioprocesses. ENVIRONMENTAL IMPLICATION: The oxidation of arsenopyrite presents significant environmental hazards, as it can contribute to acid mine drainage generation and arsenic mobilization from sulfidic mine wastes. Bioleaching is a proven cost-effective and environmentally friendly extractive technology, which has been applied for decades in metal recovery from minerals or tailings. In this work, efficient extraction of arsenic from arsenopyrite bioleaching was presented through coupling the process with bio-oxidation of pyrite, resulting in lowered accumulation of hazardous and metastable Fe(III)/As-bearing secondary phases. The results could help improve current biomining operations and/or contribute to the development of novel cost-effective bioprocesses for metal extraction.

Distribution of acid-volatile sulfides and simultaneously extracted metals in Guanabara Bay: combination of anthropogenic, sedimentological, and geochemical processes.

Coastal sedimentary systems are affected by continental and marine metal pollutant inputs associated with different hydrodynamic characteristics and geochemical processes. These include the formation of acid-volatile sulfides (AVS) within sediments, which affects metal bioavailability and associated aquatic biota toxicity risks. Physicochemical changes in these environments in the face of extreme natural or man-made environmental influences can dramatically alter metal bioavailability and toxicity through metal binding and immobilization as insoluble sulfides. Surface sediments from Guanabara Bay, river mouths, and two mangrove areas were collected, and AVS and simultaneously extracted metals Cd, Cu, Fe, Mn, Ni, Pb, and Zn and ΣSEM were determined to assess sediment quality. A severe eutrophication history favored AVS concentrations exceeding or close to the sum-SEM concentrations, demonstrating that AVS play an important role in making trace metals unavailable for assimilation by living organisms, mitigating the risks of contamination for the local biota. This eutrophication-driven sulfide accumulation may attenuate the sediment toxicity in sites heavily polluted by metals, while some fewer eutrophic sites became more exposed to metals in excess to AVS.

The regulation of CuSNPs' interface for further enhancing mechanical and photothermal conversion properties of chitosan/@CuSNPs hybrid fibers.

Our previous study has demonstrated that the microstructure of copper sulfide nanoparticles (CuSNPs) can be controlled to enhance mechanical and photothermal conversion properties of chitosan (CS)/CuSNPs hybrid fibers. However, achieving optimal dispersion and compatibility of CuSNPs within a CS matrix remains a challenge, this study aims to improve dispersion and compatibility by modifying the CuSNPs' interface, thereby enhancing mechanical and photothermal conversion properties of hybrid fibers. The interfaces of @CuSNPs (CuS@Xylan NPs, CuS@SA NPs, and CuS@PEG NPs) contain hydroxyl groups, facilitating the hydrogen bonds formation with the CS matrix. The dispersibility is further enhanced by the synergistic effect of xylan and SA's anionic charges with cationic chitosan. Notably, the viscosity of the CS/@CuSNPs hybrid spinning solution is significantly enhanced, resulting in improved breaking strength for initial hybrid fibers. Specifically, the breaking strength of CS/CuS@Xylan NPs hybrid fibers reaches 1.4 cN/dtex, exhibiting a 42.86 % and 20.6 % increase over CS and CS/CuSNPs hybrid fibers. Simultaneously, the CS/CuS@Xylan NPs hybrid fibers exhibit exceptional photothermal conversion performance, surpassing that of CS fibers by 5.2 times and CS/CuSNPs hybrid fibers by 1.4 times. The regulation of interface modification is an efficient approach to enhance the tensile strength and photothermal conversion properties of CS/CuSNPs hybrid fibers.

Sulfur Vacancies in Pyrite Trigger the Path to Nonradical Singlet Oxygen and Spontaneous Sulfamethoxazole Degradation: Unveiling the Hidden Potential in Sediments.

Pharmaceutical residues in sediments are concerning as ubiquitous emerging contaminants. Pyrite is the most abundant sulfide minerals in the estuarine and coastal sediments, making it a major sink for pharmaceutical pollutants such as sulfamethoxazole (SMX). However, research on the adsorption and redox behaviors of SMX on the pyrite surface is limited. Here, we investigated the impact of the nonphotochemical process of pyrite on the fate of coexisting SMX. Remarkably, sulfur vacancies (SVs) on pyrite promoted the generation of nonradical species (hydrogen peroxide, H2O2 and singlet oxygen, 1O2), thereby exhibiting prominent SMX degradation performance under darkness. Nonradical 1O2 contributed approximately 73.1% of the total SMX degradation. The SVs with high surrounding electron density showed an advanced affinity for adsorbing O2 and then initiated redox reactions in the sediment electron-storing geobattery pyrite, resulting in the extensive generation of H2O2 through a two-electron oxygen reduction pathway. Surface Fe(III) (hydro)oxides on pyrite facilitated the decomposition of H2O2 to 1O2 generation. Distinct nonradical products were observed in all investigated estuarine and coastal samples with the concentrations of H2O2 ranging from 1.96 to 2.94 µM, while the concentrations of 1O2 ranged from 4.63 × 10-15 to 8.93 × 10-15 M. This dark-redox pathway outperformed traditional photochemical routes for pollutant degradation, broadening the possibilities for nonradical species use in estuarine and coastal sediments. Our study highlighted the SV-triggered process as a ubiquitous yet previously overlooked source of nonradical species, which offered fresh insights into geochemical processes and the dynamics of pollutants in regions of frequent redox oscillations and sulfur-rich sediments.

A novel sulfidogenic process via sulfur reduction to remove arsenate in acid mine drainage: Insights into the performance and microbial mechanisms.

Biological sulfidogenic processes based on sulfate-reducing bacteria (SRB) are not suitable for arsenic (As)-containing acid mine drainage (AMD) treatment because of the formation of the mobile thioarsenite during sulfate reduction. In contrast, biological sulfidogenic processes based on sulfur-reducing bacteria (S0RB) produce sulfide without pH increase, which could achieve more effective As removal than the SRB-based process. However, the reduction ability and toxicity tolerance of S0RB to As remains mysterious, which may substantially affect the practical applicability of this process when treating arsenate (As(V))-containing AMD. Thus, this study aims to develop a biological sulfur reduction process driven by S0RB, and explore its long-term performance on As(V) removal and microbial community evolution. Operating under moderately acidic conditions (pH=4.0), the presence of 10 mg/L As(V) significantly suppressed the activity of S0RB, leading to the failure of As(V) removal. Surprisingly, a drop in pH to 3.0 enhanced the tolerance of S0RB to As toxicity, allowing for efficient sulfide production (396±102 mg S/L) through sulfur reduction. Consequently, effective and stable removal of As(V) (99.9 %) was achieved, even though the sulfidogenic bacteria were exposed to high levels of As(V) (42 mg/L) in long-term trials. Spectral and spectroscopic analysis showed that As-bearing sulfide minerals were present in the bioreactor. Remarkably, the presence of As(V) induced notable changes in the microbial community composition, with Desulfurella and Clostridium identified as predominate sulfur reducers. The qPCR result further revealed an increase in the concentration of functional genes related to As transport (asrA and arsB) in the bioreactor sludge as the pH decreased from 4.0 to 3.0. This suggests the involvement of microorganisms carrying asrA and arsB in an As transport process. Furthermore, metagenomic binning demonstrated that Desulfurella contained essential genes associated with sulfur reduction and As transportation, indicating its genetic potential for sulfide production and As tolerance. In summary, this study underscores the effectiveness of the biological sulfur reduction process driven by S0RB in treating As(V)-contaminated AMD. It offers insights into the role of S0RB in remediating As contamination and provides valuable knowledge for practical applications.

Synthesis of α,ω-bis-Mercaptoacyl Poly(alkyl oxide)s and Development of Thioether Cross-Linked Liposome Scaffolds for Sustained Release of Drugs.

With the aim to develop novel scaffolds for the sustained release of drugs, we initially developed an easy approach for the synthesis of α,ω-homobifunctional mercaptoacyl poly(alkyl oxide)s. This was based on the esterification of the terminal hydroxyl groups of poly(alkyl oxide)s with suitably S-4-methoxytrityl (Mmt)-protected mercapto acids, followed by the removal of the acid labile S-Mmt group. This method allowed for the efficient synthesis of the title compounds in high yield and purity, which were further used in the development of a thioether cross-linked liposome scaffold, by thia-Michael reaction of the terminal thiol groups with pre-formed nano-sized liposomes bearing maleimide groups on their surface. The reaction process was followed by 1H-NMR, using a Carr-Purcell-Meiboom-Gill (CPMG) relaxation dispersion NMR experiment (1H-NMR CPMG), which allowed for real-time monitoring and optimization of the reaction process. The thioether cross-linked liposomal scaffold that was synthesized was proven to preserve the nano-sized characteristics of the initial liposomes and allowed for the sustained release of calcein (which was used as a hydrophilic dye and a hydrophilic drug model), providing evidence for the efficient synthesis of a novel drug release scaffold consisting of nanoliposome building blocks.

Role of tungsten disulfide quantum dots in specific protein-protein interactions at air-water interface.

The intriguing network of antibody-antigen (Ab-Ag) interactions is highly governed by environmental perturbations and the nature of biomolecular interaction. Protein-protein interactions (PPIs) have potential applications in developing protein-adsorption-based sensors and nano-scale materials. Therefore, characterizing PPIs in the presence of a nanomaterial at the molecular level becomes imperative. The present work involves the investigation of antiferritin-ferritin (Ab-Ag) protein interactions under the influence of tungsten disulfide quantum dots (WS2 QDs). Isothermal calorimetry and contact angle measurements validated the strong influence of WS2 QDs on Ab-Ag interactions. The interfacial signatures of nano-bio-interactions were evaluated using sum frequency generation vibration spectroscopy (SFG-VS) at the air-water interface. Our SFG results reveal a variation in the tilt angle of methyl groups by ∼12° ± 2° for the Ab-Ag system in the presence of WS2 QDs. The results illustrated an enhanced ordering of water molecules in the presence of QDs, which underpins the active role of interfacial water molecules during nano-bio-interactions. We have also witnessed a differential impact of QDs on Ab-Ag by raising the concentration of the Ab-Ag combination, which showcased an increased inter-molecular interaction among the Ab and Ag molecules and a minimal influence on the methyl tilt angle. These findings suggest the formation of stronger and ordered Ab-Ag complexes upon introducing WS2 QDs in the aqueous medium and signify the potentiality of WS2 QDs relevant to protein-based sensing assays.

The sulfidation behavior of zinc during microwave hydrothermal sulfidation of heavy metal-containing sludge.

The heavy metals present in the sludge can undergo a reaction with sulfur, leading to their conversion into metal sulfides through hydrothermal sulfidation. Sulfur ions, possessing a strong sulfidation capability, can operate within a wider pH range at elevated temperatures. The high temperature environment promotes the sulfidation process of zinc within heavy metal-laden sludge. Increasing the temperature of microwave hydrothermal sulfidation and extending the sulfidation duration for heavy metal-containing sludge can enhance the growth of crystal size in the artificially synthesized zinc sulfide. Zinc sulfide predominantly takes the form of ZnS, which facilitates the subsequent flotation recovery of zinc.

Ecotoxic effect in Allium cepa due to sphalerite weathering arising in calcareous conditions.

The ecotoxic effect of Zn species arising from the weathering of the marmatite-like sphalerite ((Fe, Zn)S) in Allium cepa systems was herein evaluated in calcareous soils and connected with its sulfide oxidation mechanism to determine the chemical speciation responsible of this outcome. Mineralogical analyses (X-ray diffraction patterns, Raman spectroscopy, scanning electron microscopy and atomic force microscopy), chemical study of leachates (total Fe, Zn, Cd, oxidation-reduction potential, pH, sulfates and total alkalinity) and electrochemical assessments (chronoamperometry, chronopotentiometry, cyclic voltammetry, and electrochemical impedance spectroscopy) were carried out using (Fe, Zn)S samples to elucidate interfacial mechanisms simulating calcareous soil conditions. Results indicate the formation of polysulfides (Sn2-), elemental sulfur (S0), siderite (FeCO3)-like, hematite (Fe2O3)-like with sorbed CO32- species, gunningite (ZnSO4·H2O)-like phase and smithsonite (ZnCO3)-like compounds in altered surface under calcareous conditions. However, the generation of gunningite (ZnSO4·H2O)-like phase was predominant bulk-solution system. Quantification of damage rates ranges from 75 to 90% of bulb cells under non-carbonated conditions after 15-30 days, while 50-75% of damage level is determined under neutral-alkaline carbonated conditions. Damage ratios are 70.08 and 30.26 at the highest level, respectively. These findings revealed lower ecotoxic damage due to ZnCO3-like precipitation, indicating the effect of carbonates on Zn compounds during vegetable up-taking (exposure). Other environmental suggestions of the (Fe, Zn)S weathering and ecotoxic effects under calcareous soil conditions are discussed.

High-purity monoclinic pyrrhotite derived from natural pyrite with excellent removal performance for Cr (VI) and its mechanism.

Pyrrhotite, especially the monoclinic type, is a promising material for removing Cr (VI) from wastewater and groundwater due to its high reactivity. However, the purity of the preparation monoclinic pyrrhotite from heated natural pyrite is not high enough, and the role of possible sulfur vacancies in pyrrhotite's crystal structure has been largely ignored in the removal mechanism of Cr (VI). In this work, we characterized the phase composition changes of annealed pyrite in inert gas and prepared high-purity (~ 96%) monoclinic pyrrhotite at the optimal condition. We found that it could remove 18.6 mg/g of Cr (VI) by redox reaction, which is the best value reported of natural pyrite-derived materials so far. As the reactive media material of simulated permeable reactive barrier, the service life of the high-purity monoclinic pyrrhotite column is 297 PV, which is much longer than that of the pyrite column (50 PV). A new founding is that S2- and S vacancy play the essential role during the redox reaction of pyrrhotite and Cr (VI). Monoclinic pyrrhotite had more S vacancy than hexagonal pyrrhotite and pyrite, which explained its superior Cr (VI) removal performance.

Synthesis, Bioactivities, and Antibacterial Mechanism of 5-(Thioether)-N-phenyl/benzyl-1,3,4-oxadiazole-2-carboxamide/amine Derivatives.

1,3,4-Oxadiazole thioethers have shown exciting antibacterial activities; however, the current mechanism of action involving such substances against bacteria is limited to proteomics-mediated protein pathways and differentially expressed gene analysis. Herein, we report a series of novel 1,3,4-oxadiazole thioethers containing a carboxamide/amine moiety, most of which show good in vitro and in vivo bacteriostatic activities. Compounds A10 and A18 were screened through CoMFA models as optimums against Xanthomonas oryzae pv. oryzae (Xoo, EC50 values of 5.32 and 4.63 mg/L, respectively) and Xanthomonas oryzae pv. oryzicola (Xoc, EC50 values of 7.58 and 7.65 mg/L, respectively). Compound A10 was implemented in proteomic techniques and activity-based protein profiling (ABPP) analysis to elucidate the antibacterial mechanism and biochemical targets. The results indicate that A10 disrupts the growth and pathogenicity of Xoc by interfering with pathways associated with bacterial virulence, including the two-component regulation system, flagellar assembly, bacterial secretion system, quorum sensing, ABC transporters, and bacterial chemotaxis. Specifically, the translational regulator (CsrA) and the virulence regulator (Xoc3530) are two effective target proteins of A10. Knocking out the CsrA or Xoc3530 gene in Xoc results in a significant reduction in the motility and pathogenicity of the mutant strains. This study contributes available molecular entities, effective targets, and mechanism basis for the management of rice bacterial diseases.

Analysis and characterization of sulfane sulfur.

In the late 1970s, sulfane sulfur was defined as sulfur atoms covalently bound only to sulfur atoms. However, this definition was not generally accepted, as it was slightly vague and difficult to comprehend. Thus, in the early 1990s, it was defined as "bound sulfur," which easily converts to hydrogen sulfide upon reduction with a thiol-reducing agent. H2S-related bound sulfur species include persulfides (R-SSH), polysulfides (H2Sn, n ≥ 2 or R-S(S)nS-R, n ≥ 1), and protein-bound elemental sulfur (S0). Many of the biological effects currently associated with H2S may be attributed to persulfides and polysulfides. In the 20th century, quantitative determination of "sulfane sulfur" was conventionally performed using a reaction called cyanolysis. Several methods have been developed over the past 30 years. Current methods used for the detection of H2S and polysulfides include colorimetric assays for methylene blue formation, sulfide ion-selective or polarographic electrodes, gas chromatography with flame photometric or sulfur chemiluminescence detection, high-performance liquid chromatography analysis with fluorescent derivatization of sulfides, liquid chromatography with tandem mass spectrometry, the biotin switch technique, and the use of sulfide or polysulfide-sensitive fluorescent probes. In this review, we discuss the methods reported to date for measuring sulfane sulfur and the results obtained using these methods.

Facile Method for Determining Lanthipeptide Stereochemistry.

Lanthipeptides make up a large group of natural products that belong to the ribosomally synthesized and post-translationally modified peptides (RiPPs). Lanthipeptides contain lanthionine and methyllanthionine bis-amino acids that have varying stereochemistry. The stereochemistry of new lanthipeptides is often not determined because current methods require equipment that is not standard in most laboratories. In this study, we developed a facile, efficient, and user-friendly method for detecting lanthipeptide stereochemistry, utilizing advanced Marfey's analysis with detection by liquid chromatography coupled with mass spectrometry (LC-MS). Under optimized conditions, 0.05 mg of peptide is sufficient to characterize the stereochemistry of five (methyl)lanthionines of different stereochemistry using a simple liquid chromatography setup, which is a much lower detection limit than current methods. In addition, we describe methods to readily access standards of the three different methyllanthionine stereoisomers and two different lanthionine stereoisomers that have been reported in known lanthipeptides. The developed workflow uses a commonly used nonchiral column system and offers a scalable platform to assist antimicrobial discovery. We illustrate its utility with an example of a lanthipeptide discovered by genome mining.

Hydrogen Sulfide (H2S)/Polysulfides (H2Sn) Signalling and TRPA1 Channels Modification on Sulfur Metabolism.

Hydrogen sulfide (H2S) and polysulfides (H2Sn, n ≥ 2) produced by enzymes play a role as signalling molecules regulating neurotransmission, vascular tone, cytoprotection, inflammation, oxygen sensing, and energy formation. H2Sn, which have additional sulfur atoms to H2S, and other S-sulfurated molecules such as cysteine persulfide and S-sulfurated cysteine residues of proteins, are produced by enzymes including 3-mercaptopyruvate sulfurtransferase (3MST). H2Sn are also generated by the chemical interaction of H2S with NO, or to a lesser extent with H2O2. S-sulfuration (S-sulfhydration) has been proposed as a mode of action of H2S and H2Sn to regulate the activity of target molecules. Recently, we found that H2S/H2S2 regulate the release of neurotransmitters, such as GABA, glutamate, and D-serine, a co-agonist of N-methyl-D-aspartate (NMDA) receptors. H2S facilitates the induction of hippocampal long-term potentiation, a synaptic model of memory formation, by enhancing the activity of NMDA receptors, while H2S2 achieves this by activating transient receptor potential ankyrin 1 (TRPA1) channels in astrocytes, potentially leading to the activation of nearby neurons. The recent findings show the other aspects of TRPA1 channels-that is, the regulation of the levels of sulfur-containing molecules and their metabolizing enzymes. Disturbance of the signalling by H2S/H2Sn has been demonstrated to be involved in various diseases, including cognitive and psychiatric diseases. The physiological and pathophysiological roles of these molecules will be discussed.

Adaptability of sulfur-disproportionating bacteria for mine water remediation under the pressures of heavy metal ions and high sulfate content.

Biological sulfide production processes mediated by sulfate/sulfur reduction have gained attention for metal removal from industrial wastewater (e.g., mine water (MW) and metallurgical wastewater) via forming insoluble metal sulfides. However, these processes often necessitate the addition of external organic compounds as electron donors, which poses a constraint on the broad application of this technology. A recent proof of concept study reported that microbial sulfur disproportionation (SD) produced sulfide with no demand for organics, which could achieve more cost-benefit MW treatment against the above-mentioned processes. However, the resistance of SD bioprocess to different metals and high sulfate content in MW remains mysterious, which may substantially affect the practical applicability of such process. In this study, the sulfur-disproportionating bacteria (SDB)-dominated consortium was enriched from a previously established SD-driven bioreactor, in which Dissulfurimicrobium sp. with a relative abundance of 39.9 % was the predominated SDB. When exposed to the real pretreated acidic MW after the pretreatment process of pH amelioration, the sulfur-disproportionating activity remained active, and metals were effectively removed from the MW. Metal tolerance assays further demonstrated that the consortium had a good tolerance to different metal ions (i.e., Pb2+, Cu2+, Ni2+, Mn2+, Zn2+), especially for Mn2+ with a concentration of approximately 20 mg/L. It suggested the robustness of Dissulfurimicrobium sp. likely due to the presence of genes encoding for the enzymes associated with metal(loid) resistance/uptake. Additionally, although high sulfate content resulted in a slight inhibition on the sulfur-disproportionating activity, the consortium still achieved sulfide production rates of 27.3 mg S/g VSS-d on average under an environmentally relevant sulfate level (i.e., 1100 mg S/L), which is comparable to those reported in sulfate reduction. Taken together, these findings imply that SDB could ensure sustainable MW treatment in a more cost-effective and organic-free way.

Roles of the Comproportionation Reaction in SO2 Reduction Using Methane for the Flexible Recovery of Elemental Sulfur or Sulfides.

SO2 reduction with CH4 to produce elemental sulfur (S8) or other sulfides is typically challenging due to high energy barriers and catalyst poisoning by SO2. Herein, we report that a comproportionation reaction (CR) induced by H2S recirculating significantly accelerates the reactions, altering reaction pathways and enabling flexible adjustment of the products from S8 to sulfides. Results show that SO2 can be fully reduced to H2S at a lower temperature of 650 °C, compared to the 800 °C required for the direct reduction (DR), effectively eliminating catalyst poisoning. The kinetic rate constant is significantly improved, with CR at 650 °C exhibiting about 3-fold higher value than DR at 750 °C. Additionally, the apparent activation energy decreases from 128 to 37 kJ/mol with H2S, altering the reaction route. This CR resolves the challenges related to robust sulfur-oxygen bond activation and enhances CH4 dissociation. During the process, the well-dispersed lamellar MoS2 crystallites with Co promoters (CoMoS) act as active species. H2S facilitates the comproportionation reaction, reducing SO2 to a nascent sulfur (Sx*). Subsequently, CH4 efficiently activates CoMoS in the absence of SO2, forming H2S. This shifts the mechanism from Mars-van Krevelen (MvK) in DR to sequential Langmuir-Hinshelwood (L-H) and MvK in CR. Additionally, it mitigates sulfation poisoning through this rapid activation reaction pathway. This unique comproportionation reaction provides a novel strategy for efficient sulfur resource utilization.

A steady-state pH-control model for the biological production of elemental sulfur from sulfate in mining-influenced water.

We developed a model to predict pH, alkalinity, and the Langelier Saturation Index (LSI) in coupled systems of hydrogen-based autotrophic sulfate reduction and aerobic oxidation of sulfide to elemental sulfur. To neutralize the biologically generated base, the model allows for the addition of CO2 as part of the gas mixture, the independent addition of HCl or CO2, or a combination of the alternatives. The model was evaluated against the results from a laboratory system for the production of elemental sulfur from sulfate present in mine-tailings water, which is characterized by the presence of elevated sulfate and calcium concentrations. Model results were consistent with measurements of pH, alkalinity, and LSI. The model showed how the acid demands of the coupled reactors vary with pH, being approximately equivalent at pH over 8, when ionized sulfide predominates. Also, while the sulfidogenic reactor was well buffered due to the production of ionized sulfide, the sulfidotrophic reactor in the absence of sulfide and carbonate alkalinity was prone to pH declines. Considering that both reactors operated in the positive range of LSI, the model also indicated that addition of CO2 should be minimized due to increase in the bicarbonate concentration and its effect on increasing the LSI. Furthermore, the model also showed that exclusive reliance on HCl for pH control can be incompatible with Cl- effluent standards, which means that a compromise must be reached between CO2 and HCl additions.

Fatty Amine-Mediated Synthesis of Hierarchical Copper Sulfide Nanoflowers for Efficient NIR-II Photothermal Conversion and Antibacterial Performance.

Non-noble metal photothermal materials have recently attracted increasing attention as unique alternatives to noble metal-based ones due to advantages like earth abundance, cost-effectiveness, and large-scale application capability. In this study, hierarchical copper sulfide (CuS) nanostructures with tunable flower-like morphologies and dimensional sizes are prepared via a fatty amine-mediated one-pot polyol synthesis. In particular, the addition of fatty amines induces a significant decrease in the overall particle size and lamellar thickness, and their morphologies and sizes could be tuned using different types of fatty amines. The dense stacking of nanosheets with limited sizes in the form of such a unique hierarchical architecture facilitates the interactions of the electromagnetic fields between adjacent nanoplates and enables the creation of abundant hot-spot regions, thus, benefiting the enhanced second near-infrared (NIR-II) light absorptions. The optimized CuS nanoflowers exhibit a photothermal conversion efficiency of 37.6%, realizing a temperature increase of nearly 50 °C within 10 min under 1064 nm laser irradiations at a power density of 1 W cm-2. They also exhibit broad-spectrum antibacterial activity, rendering them promising candidates for combating a spectrum of bacterial infections. The present study offers a feasible strategy to generate nanosheet-based hierarchical CuS nanostructures and validates their promising use in photothermal conversion, which could find important use in NIR-II photothermal therapy.